Showing all 7 results

  • Flux oxygen cutting machine

    The device is designed for manual oxygen flux cutting of stainless steels, cast irons and non-ferrous alloys, powder lancing of concrete, reinforced concrete, brick, refractory concrete, “hardened” metal (scrap), burning with a hand lance of spear holes in metals and non-metallic materials. It is used for cutting of workpieces of stainless steel, cast iron, non-ferrous alloys at machine manufacturing and iron and steel enterprises, scrap cutting of metal, including disposing of military equipment, burning of holes, and severing (cutting of windows, apertures, holes) of building structures made of concrete, reinforced concrete, and other building materials, cutting of apertures at a blast furnace lining during repairing works, notch breaking for the metal release, cutting of horses and performing of other work at the iron and steel enterprises.
    Full description below >>

  • Cutter for emergency cutting of steel

    The cutter for emergency cutting of steels of increased reliability is designed for manual oxygen cutting of carbon low-alloy steels up to 700 mm thick in the harsh conditions of metallurgical and other industries and provides cutting of slabs, blooms or billets. Propane-butane (natural gas) and low-pressure natural gas mixed with oxygen of at least 99.5% purity in accordance with GOST 5593-78 are used as fuel.
    Cutters operating on a natural gas-oxygen mixture can be operated at an ambient temperature of –20 ° C to +40 ° C, and those working on a propane-butane-oxygen mixture at a temperature of –5 ° C to +40 ° C.

  • Cutter NORD for broadband manual surface cleaning and gouging

    Cutter NORD for broadband manual surface cleaning and gouging

    Cutter NORD for broadband manual surface cleaning and gouging.

    The cutter removes the outer layer with oxygen impingement, identifies local defects, and also allows you to cut surface defects of steel billets.

  • Sale! Cutter NORD for broadband manual surface cleaning and gouging

    Cutter NORD for scrap cutting of steel up to 700 mm

    Cutter NORD for emergency cutting of steel up to 700 mm
    The manual cutter of increased reliability is designed for oxygen cutting of carbon low alloy steels up to 700 mm thickness in complicated conditions of metallurgical and other productions and provides slabs, bloom, and workpiece cutting. Cutters maintenance which operates on the mixture of conventional gas and oxygen may be performed under +40°Ñ to -20°Ñ of ambient air temperature and the ones which operate on the mixture of propane-butane-oxygen may be performed under +40°Ñ to -5°Ñ.

  • Cutters, plasma torches and accessories

    Cutters, plasma torches, and accessories

  • Scrap cutter NORD-100P

    Scrap cutter NORD-100P.
    It is designed for scrap cutting with steel thickness up to 300 mm. The cutter has inner nozzle mixing of gases that allows to operate with one cutter on different combustible gases, to increase safety for the account of kickback tolerance, to provide a safe cutter operation under encased heating of a tip. The construction of torch tip allows providing a broad range of cut thickness, a low heat up time of metal prior to cutting, high speed mixed with a narrow width, and good cutting purity, that in return results in consumable gas-saving (up to 30%).

  • cutter NORD-100P

    Hand-held cutter NORD-100P

    Handheld cutter NORD-100P.
    It is designed for scrap cutting with steel thickness up to 300 mm. The cutter has inner nozzle mixing of gases that allows to operate with one cutter on different combustible gases, to increase safety for the account of kickback tolerance, to provide a safe cutter operation under encased heating of a tip. The construction of torch tip allows providing a broad range of cut thickness, a low heat up time of metal prior to cutting, high speed mixed with a narrow width, and good cutting purity, that in return results in consumable gas-saving (up to 30%).