Showing all 7 results

  • Machine for cutting slabs, blooms

    Machine for cutting slabs, blooms

    Gas cutting machine “Slab-1” (GCM “Slab-1”) is designed for automated straight-line oxygen severing of slabs of low-carbon and low-alloyed steels with width from 1300 to 2600 mm and thickness from 100 to 400 mm. GCM allows you to cut the workpieces at a metal temperature from 0°C to 900°C, using oxygen with pressure from 12 to 25 kgf/cm, oxygen purity is not less than 99.5%, and natural gas with a pressure of 2.5 to 3.5 kgf/cm.

  • Nord-500 plasma cutting machine

    NORD-500

    Plasma cutting machine “NORD-500” is intended for use in the metallurgical industry. It provides a high-performance straight-line severing of oxygen cutting of sheet metal, slabs, blooms, billets, etc. of low-carbon low-alloyed steel with thickness from 200 to 500 mm.
    The machine consists of a reinforced frame, which includes driving and driven shafts with supporting rollers. From the side of the cutter, the rollers are protected against the flame and the molten metal splash with a cover plate.

  • Straight-line cutter EDGE

    Portable machines of straight-line cutting of metal «Gran’» and
    «Gran-24V» is designed for cutting rolled metal products into
    strips. Machines are equipped with a special guide with back straps and the platen rollers that guarantees a high rigidity of construction and consequently, the excellent cut quality of the butt end surface.
    The high speed of travel of the cutter allows the use of gas-oxygen as well as plasma cutting technology. The machines can be used both in
    the field environment and in industrial enterprises. Machine “Gran-
    24V” is equipped with a stepper motor that is running with ultra-low a safe voltage of 24V, allows you to use the machine in the absence
    of grounding.

  • Cutter for emergency cutting of steel

    The cutter for emergency cutting of steels of increased reliability is designed for manual oxygen cutting of carbon low-alloy steels up to 700 mm thick in the harsh conditions of metallurgical and other industries and provides cutting of slabs, blooms or billets. Propane-butane (natural gas) and low-pressure natural gas mixed with oxygen of at least 99.5% purity in accordance with GOST 5593-78 are used as fuel.
    Cutters operating on a natural gas-oxygen mixture can be operated at an ambient temperature of –20 ° C to +40 ° C, and those working on a propane-butane-oxygen mixture at a temperature of –5 ° C to +40 ° C.

  • Cutter NORD for broadband manual surface cleaning and gouging

    Cutter NORD for broadband manual surface cleaning and gouging

    Cutter NORD for broadband manual surface cleaning and gouging.

    The cutter removes the outer layer with oxygen impingement, identifies local defects, and also allows you to cut surface defects of steel billets.

  • Sale! Cutter NORD for TC and CC machines

    Cutter NORD for GCM CCM

    Cutter NORD for TC and CC machines (Torch cutting machines, continuous casting machines)
    The water-cooled cutter works on inner nozzle mixing of combustible gas and preheating oxygen which provides high reliability in complicated operating conditions. The construction of torch tip allows performing metal cutting irrespective of its temperature without edge preheat.

  • Cutters, plasma torches and accessories

    Cutters, plasma torches, and accessories