Slab 1 – oxy-fuel and powder cutting machine

Slab-1 is a gas cutting machine for mechanized oxy-fuel and powder cutting of steel, cast iron and scrap up to 800 mm thick.

REQUEST A QUOTE NOW!

  • Check Mark Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Check Mark Secure Payments

Description

Slab-1 is a gas cutting machine designed for mechanized straight-line oxy-fuel and metal powder cutting of steel, cast iron, and scrap up to 800 mm thick and 2600 mm wide.

The cutter operates on the principle of in-nozzle mixing of fuel gas and heating oxygen, providing high reliability in difficult operating conditions. The cutter’s highly optimized water-cooling enables bringing it as close as 50 – 70 mm from the workpiece during the cutting. Close distance cutting increases cutting speed while minimizing oxygen consumption and the amount burr formed on the bottom edges of the cut piece.

Specifications

Supply voltage single phase, 230 V, 50 Hz
24 VDC for control circuit
Power consumption 200 W
Cutter movement speed 20 – 2000 mm/min
Number of cutters 1
Cutting length up to 5000 mm
Carrier gas pressure 0.8 – 1.5 kg/cm2
Carrier gas consumption 1.5 – 6 m3
Powder feeder capacity 40 kg
Powder consumption 12 – 50 kg/hr
Powder for cutting Iron powder, particle size 80 – 200 μm
Cutting machine weight 75 kg
Remote control weight 2 kg
Rail weight (5 meters) 70 kg
Rail length up to 5000 mm

Cutting parameters

Workpiece thickness, mm Natural gas consumption, m3/hr Pre-heat oxygen consumption, m3/hr Cutting oxygen consumption, m3/hr Cutting oxygen pressure setting Metal powder consumption, g/min Cutting speed, mm/min
Carbon steels
300 14 – 18 17 – 21 50 – 66 9 – 11 120 – 150
400 14 – 18 17 – 21 91 – 109 9 – 11 100 – 120
500 14 – 18 17 – 21 112.5 – 135 9 – 11 90 – 100
600 14 – 18 17 – 21 162 – 194.4 9 – 11 70 – 90
22 – 30 202 – 225 4 – 6 70 – 90
700 22 – 30 17 – 21 225 – 315 4 – 6 60 – 90
Stainless steels, cast iron, scrap
300 14 – 18 17 – 21 58 – 65 8 – 9 290 – 320 80 – 100
400 14 – 18 17 – 21 90 – 102 8 – 9 400 – 450 70 – 90
500 22 – 30 22 – 30 173 – 202 4 – 6 450 – 500 60 – 80
600 22 – 30 22 – 30 202 – 225 4 – 6 550 – 600 50 – 80
700 22 – 30 22 – 30 225 – 315 4 – 6 650 – 750 50 – 70

Reviews

There are no reviews yet.

Be the first to review “Slab 1 – oxy-fuel and powder cutting machine”

Your email address will not be published. Required fields are marked *