High throughput oxy-fuel cutting machine Avalanche-2

Avalanche-2 is a supersonic narrow-jet cutting machine for high-throughput oxy-fuel cutting of ingots and oversized steel scrap up to 1.5 meters thick.

REQUEST A QUOTE NOW!

  • Check Mark Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Check Mark Secure Payments

Description

Avalanche-2 allows high-throughput cutting of oversized steel scrap up to 1.5 meters thick. It can operate in harsh conditions at an outside temperature of –30°C to +50°C. Natural gas is used as fuel gas.

The machine cutter is designed with in-nozzle gas mixing and is equipped with a two-flame monoblock nozzle that provides heating of the upper and lower edges of the cut metal, facilitating high thickness steel cutting. The torch can be air-cooled or water-cooled, depending on the operating conditions.

Avalanche-2 can be equipped with an automatic cutter height tracking system suitable for workpiece with a small variation in height (mainly for slab trimming).

Cutting steel with thicknesses of 600 mm and more is carried out with low pressure of oxygen.

Specifications

Supply voltage 3-phase, 400 V, 50 Hz
Power consumption up to 10 kW
Number of oxy-fuel cutters 2
Dimensions 6 500 × 6 000 × 3 500 mm
Working range up to 36 000 mm length
3 000 mm width
1 500 mm height
Cantilever extension up to 4 200 mm
Rail track length up to 40 000 mm
Rail track width 1 450 – 1 520 mm
Longitudinal/transversal travel speed 25 – 6 000 mm/min
Vertical travel speed up to 2 000 mm/min
Cutting thickness 100 – 1200 mm (for low-carbon steel)
Cutting speed 20 – 400 mm/min
Gases used Natural gas, oxygen, nitrogen

 

Cutting parameters

Workpiece thickness, mm Natural gas consumption, m3/hr Pre-heat oxygen consumption, m3/hr Cutting oxygen consumption, m3/hr Cutting oxygen pressure setting Metal powder consumption, g/min Cutting speed, mm/min
Carbon steels
300 14 – 18 17 – 21 50 – 66 9 – 11 120 – 150
400 14 – 18 17 – 21 91 – 109 9 – 11 100 – 120
500 14 – 18 17 – 21 112.5 – 135 9 – 11 90 – 100
600 14 – 18 17 – 21 162 – 194.4 9 – 11 70 – 90
22 – 30 202 – 225 4 – 6 70 – 90
700 22 – 30 17 – 21 225 – 315 4 – 6 60 – 90
1200 up to 40 up to 28 up to 320 4 – 6 30 – 50
Stainless steels, cast iron, scrap
300 14 – 18 17 – 21 58 – 65 8 – 9 290 – 320 80 – 100
400 14 – 18 17 – 21 90 – 102 8 – 9 400 – 450 70 – 90
500 22 – 30 22 – 30 173 – 202 4 – 6 450 – 500 60 – 80
600 22 – 30 22 – 30 202 – 225 4 – 6 550 – 600 50 – 80
700 22 – 30 22 – 30 225 – 315 4 – 6 650 – 750 50 – 70

 

 

Additional information

Brand

Plazmamax

Reviews

There are no reviews yet.

Be the first to review “High throughput oxy-fuel cutting machine Avalanche-2”

Your email address will not be published. Required fields are marked *